Products

We design and manufacture energy absorption, vibration isolation and noise attentuation products for a wide variety of commercial aircraft, business jet and helicopter applications.

Use the search tools below to browse our products.

Products found: 43
GDH Series Purge Assemblies

GDH Series Purge Assemblies

Conoflow’s GDH series purge assemblies consist of a GH21XT series fixed differential pressure regulator piped to a needle valve equipped flow meter. The fixed differential pressure regulator maintains a constant pressure drop across the flow meter, resulting in consistent flow regardless of downstream pressure fluctuation
Airlock Fail-Safe System by Conoflow

Airlock Fail-Safe System

Today’s systems demand ultimate performance from all components in the system. These include not only the primary instruments, but also the final control element, an integral part of the control loop.

Conoflow Series HPNGV2 Gas Regulator

HPNGV2 Gas Regulator

The Conoflow HPNGV Series Gas Regulator has earned a reputation for world class reliability and performance.

Conoflow Series HPNGV5 Series CNG Regulator

HPNGV5 Series CNG Regulator

The HPNGV5 Series CNG Regulator is a new generation of the ITT Conoflow HPNGV series regulator.  New materials, such as the proprietary Fluorosilicone rubber diaphragm, improve the resistance to heat and synthetic oils for improved life expectancy.  
Conoflow Series HPNGV4 Compressed Gas Regulator, CNG regulator

HPNGV4 Compressed Gas Regulator

The New HPNGV4 Series CNG Regulator incorporates the same robust design and manufacturing characteristics as the HPNGV2 Series.
Conoflow® Series GFH25XT1767 IEEE Airpak, Filter-Regulators

GFH25XT1767 Filter Regulator

Conoflow’s IEEE Airpak, Filter-Regulators have been qualified in accordance with the requirements of IEEE 323-1974 and the recommended practices of IEEE 344-1975.

GH232T Series Reversing Relay

GH232T Series Reversing Relay

The purpose of the GH232T is to reduce the cushion load to the actuator in proportion to the positioner output pressure. This effectively provides the advantage of a full reversal positioner by providing full differential pressure across the actuator piston if necessary.

FR95 Airpak® Filter-Regulator

Conoflow's FR95 Series Airpak®, Filter-Regulator is used to provide clean, accurate air to instruments, valves, positioners, transducers and other pneumatic control devices. This units design provides high flow capability, durable materials of construction and bubble tight shut-off.
IEEE Nuclear Products

GT25/GT45/GT65 I/P Transducers

Conoflow’s IEEE Qualified I/P Transducers have been qualified in accordance with the requirements of IEEE 323-1974 and the recommended practices of IEEE 344-1975. The test program Thermal Aging, Radiation Aging, Wear Aging, Seismic Qualification and Steam Line Break Testing. For details of test conditions, consult the factory.
pneumatic piston, air actuator

GB50/GB55 Pneumatic Piston Actuators

Conoflow’s Pneumatic Piston Actuators are compact units designed to function in today’s high performance instrument systems. Piston diameters of 3” to 12.5” are available with standard strokes up to 10” (for stroke lengths greater than 10”, consult the factory). Integral positioners are standard for modulating service.
linear pneumatic actuator, level actuators

GB52SC/GB53SC Series Level Actuators

Conoflow’s Pneumatic Lever Actuators are rugged and powerful units used to automatically position dampers, louvers, variable pitch fans and to make various mechanical adjustments to process machinery. Low profile (only 18” high) requires less headroom. A sturdy ductile iron yoke with large mounting base provides rigid mounting. The steel lever arm has eight take-off positions for stroke flexibility.
GFX02/GFX04 Series Filters

GFX02/GFX04 Filters

Conoflow's GFX Series Filters are used to provide clean air to instruments and other pneumatic devices. The 35 micron filter removes foreign particles from the air allowing intermediate and final control devices to operate at peak efficiency. Available in brass or aluminum construction, the GFX Series Filters cover most of today’s instrument and industrial applications.
GH20VT - 316 Stainless Steel Low Pressure Regulator

GH20VT - 316 Stainless Steel Low Pressure Regulator

Conoflow's GH20VT - 316 Stainless Steel Low Pressure Regulator is designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation of high altitude conditions.
cushion loading regulator

GH04 Cushion Loading Regulator

The model GH04 Cushion Loading Regulator is a compact unit designed for industrial and commercial services requiring a constant, regulated air pressure.

Low Pressure Regulators, vacuum service regulator

GFH45 Airpak® Filter-Low Pressure Regulators

Conoflow's GFH45 Airpak® Filter-Low Pressure Regulators are widely used to provide clean, regulated air pressure to instruments and controls, automatic machinery and other pneumatic devices.

miniature transducer, proportional pneumatic transducer

GT210 Miniature Transducers

Conoflow’s Electropneumatic Miniature Transducers accept a variety of electrical input signals and convert them to proportional pneumatic output signals. The miniature transducer is available with two different circuit boards.

positioner, valve positioner, valve positioners

GC31/GC34 Commandaire® Positioner

Conoflow’s Commandaire® Positioner is a top mounted, integral positioner used with piston or spring and diaphragm actuators.

Stainless Steel Regulator

GH10 - 303 Stainless Steel (Internals) Regulator

Conoflow's GH10 (303 Stainless Steel Internals) Manual Loading Regulators are precision units designed for use in laboratory environments, remote loading of pneumatic devices, speed changers and other general purpose applications.
GH10 - 316 Stainless Steel Regulator

GH10 - 316 Stainless Steel Regulator

Conoflow's GH10 (316 Stainless Steel Internals) Manual Loading Regulators are precision units designed for use in laboratory environments, remote loading of pneumatic devices, speed changers and other general purpose applications.

GH10 (Aluminum) Manual Loading

Conoflow's GH10 (Aluminum Bonnet) Manual Loading Regulators are precision units designed for use in laboratory environments, remote loading of pneumatic devices, speed changers and other general purpose applications.

GH10 (Brass) Manual Loading

Conoflow's GH10 (Brass) Manual Loading Regulators are precision units designed for use in laboratory environments, remote loading of pneumatic devices, speed changers and other general purpose applications.
Pressure Reducing Regulator

GH20 Series (303 Stainless Steel Internals) Service Pressure Reducing Regulator

Conoflow's Service (GH20 Series) Regulators are rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Buna "N" diaphragms are standard in the aluminum units.
Pressure Reducing Regulator

GH20 Series (316 Stainless Steel Internals) Service Pressure Reducing Regulator

Conoflow's Service (GH20 Series) Regulators are rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Buna "N" diaphragms are standard in the aluminum units.
Pressure Reducing Regulator

GH20 Series (Aluminum Bonnet) Service Pressure Reducing Regulator

Conoflow's Service (GH20 Series) Regulators are rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Buna "N" diaphragms are standard in the aluminum units.
Brass Pressure Regulator

GH20 Series Brass Pressure Regulator

Conoflow's Service (GH20 Series) Regulators are rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Buna "N" diaphragms are standard in the aluminum units.
low pressure regulator

GH20VT Series (Brass) Low Pressure Regulator

Conoflow's GH20VT Series (Brass) Low Pressure Regulator is designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation of high altitude conditions. Metal to metal seat (standard).
differential regulator, differential pressure regulator

GH21 & GDH21 Series Differential Pressure Regulator

Conoflow’s Differential Pressure Regulators are used to maintain a constant pressure differential across a variable or fixed orifice, providing a constant flow rate regardless of variations in upstream or downstream pressure. Various forms of differential pressure regulators are available.
Flow Boosting Relay

GH22/42 Series Ratio or Flow Boosting Relay

The Conoflow GH22/42 Series Flow Boosting Relay is used to boost, amplify or reduce the pneumatic signal of a controller or similar instrument in a predetermined ratio. Using an independent supply pressure for greater flow volume, the unit relays an instrument signal to a final control element such as a valve actuator.
back pressure relay

GH30 Series Back Pressure Relay

The Conoflow Series GH30 Back Pressure Regulator is used to maintain a constant upstream pressure of gas, vapor or liquid. Designed for accurate regulation under low flow conditions, these units are widely used for protection of analysis instrumentation or as a relief valve in supply pressure lines to control devices.
Pressure Reducing Regulator

GH40 Series (302/303 Stainless Steel Internals) Service Pressure Reducing Regulator

Conoflow's Service (GH40 Series) Regulators are for applications where positive shut-off and minimum air consumption are required. These rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Teflon Buna "N" Teflon diaphragms are standard in the Stainless Steel units.
stainless steel pressure regulator

GH40 - 316 Stainless Steel Pressure Regulator

Conoflow's Service (GH40 Series) Regulators are for applications where positive shut-off and minimum air consumption are required. These rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Teflon Buna "N" Teflon diaphragms are standard in the Stainless Steel units.
Pressure Reducing Regulator

GH40 Series (Aluminum Bonnet) Service Pressure Reducing Regulator

Conoflow's Service (GH40 Series) Regulators are for applications where positive shut-off and minimum air consumption are required. These rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Buna "N" diaphragms are standard in the brass/aluminum construction regulator.

GH40 Series (Brass) Service Pressure Reducing Regulator

Conoflow's Service (GH40 Series) Regulators are for applications where positive shut-off and minimum air consumption are required. These rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Buna "N" diaphragms are standard in the Brass units.
Vacuum Service Regulator

GH40VT Series (316 Stainless Steel) Vacuum Service Regulator

Conoflow's Vacuum Regulators are designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation of high altitude conditions.
Vacuum Brass Service Regulator, brass vacuum regulator

GH40VT Series (Brass) Vacuum Brass Service Regulator

Conoflow's Vacuum Brass Service Regulators are designed to accurately regulate the sub-atmospheric pressure of a vessel being evacuated. These units are especially suited for laboratory work and test stands for simulation of high altitude conditions.
electronic transducers, electronic pressure transducers, electro pneumatic transducers

GT8_Series Milliampere Electronic Transducers

Conoflow’s GT_8 series I/P Electronic Transducers convert a milliamp electrical control signal to a proportional pneumatic output signal.

GVB/GVB12 Series Snap-Acting Relays

Designed for pneumatic systems, Conoflow Series GVB Snap-Acting Relays change ports to switch or lock in secondary air source when the main supply pressure fails below a predetermined set point. In the event of supply or pilot pressure failure, the positive action relay with one common and two inlet or outlet ports will automatically:
high pressure reducing regulator, high pressure regulators, high pressure regulator

HP300 High Pressure Regulator (Reducing)

The Conoflow HP300 High Pressure Regulator (Reducing) is designed to accurately control supply pressures up to 10,000 PSIG (69 MPa). This piston sensing, self-relieving regulator allows pressure setting reduction in a closed system by relieving downstream pressure through the regulator.
self-contained regulator, economical regulator

HP400 Self-Contained Regulator

Conoflow's HP400 is a piston-sensing, self-contained pressure reducing regulator. High inlet and outlet pressures allow use of this regulator in component testing, calibration systems, manufacturing processes and other applications that require an economical regulator having reliable and safe operating characteristics.
High-Purity Regulator

HP500 High-Purity Regulator

The HP500 High Pressure Reducing Regulator is a self-contained, diaphragm sensing high purity regulator. A broad offering of construction materials and five control pressure ranges allow for applications that include regulating specialty gasses, gas chromatography, research labos, and the regulation of corrosive and noncorrosive gasses and liquids.
HP600 High Pressure Two-Stage Regulator

HP600 High Flow Tied Diaphragm Regulator

Conoflow’s HP600 has 1/4" NPT inlet and outlet connections. Inlet and outlet gauge ports are standard. High purity internal connections and VCR, Vacuseal and Ultra Seal welded fittings are available upon request. Line and rear mounting are standard for this regulator.
High Pressure Reducing Regulator

HP610 High Flow Reducing Regulator

ITT Conoflow’s HP610 is a high purity, self-contained, spring-loaded, pressure reducing regulator. This unit is designed for use in applications requiring high flow rates and the ability to relieve outlet media pressure. Non-relieving models are also available.
HP700 High Pressure Two-Stage Regulator

HP700 High Pressure Two-Stage Regulator

Conoflow’s HP700 Series regulator is a two-stage, high purity unit designed to provide constant outlet pressure regardless of inlet pressure fluctuations. This unit is available in either brass or stainless steel construction. Maximum supply pressure rating for either material is 3500 PSIG (24.2 MPa). To provide optimum performance in specific applications, this unit is offered with relieving, non-relieving, and tied (non-relieving) diaphragm options.

NEWS

April 25, 2024

ITT Recognized as 3-Star Employer by VETS Indexes for Commitment to Hiring and Developing Military Community Members

VETS Indexes is an independent provider of Environmental, Social and Governance indexes measuring the impact o

CASE STUDY

Conoflow Fuel Regulators Drive Greener Vehicle Emissions

The number of vehicles fueled by compressed natural gas is expanding, and Conoflow fuel regulators are a key contributor to this eco-trend.

VIDEOS

See our current video library.
This site uses cookies to enable basic functionality, provide an enhanced user experience and collect performance data.
Manage